This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product

THREE over head tank/Sump indication.  motor ON, power on.

Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks.

Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement.

Its has the following unique feature:
When tank is in reserve mode or empty it automatically starts the motors.

 It indicates water levels reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.

 It green colored 2 level,1 red indications (below half red and half tank & full tank) of water in tank .

On motor symbol white colored indication for motor ON .

Has rocker switch to select Auto/manual operation.

Has soft touch ‘NEED’ button to switch ON the motor irrespective of any level in the overhead tank

Application:

• mono block/open type submarsible pumps (sump motors).

System is suitable only for single phase pump sets of maximum1.5 H. P. ratings/use as a SEMI automatic.

This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.