AUTOMATIC WATER LEVEL CONTROLLER WITH INDICATOR 8G
8GSRD
(Genarlly used SUMP TO TANK, MCB/SWITCH/DP TYPE).
Product Description
The TRUST CONTROLLERS best and most reliable water level controller 8GSR is a high performance system, built compactly to provide advanced features like water tank automatic switch, automatic motor on/off, clear liquid level display, auto / manual MODE selection , in-built low and high voltage cut-off, surge protection, dry run protection and easy operation. The automatic motor on/off function in this water level controller can switch on or switch off the pump, to maintain the predefined water level at the storage tanks. TIC Automatic Water Level Controller 8GSR can control motors up to 2 Hp capacity directly (with- out starter).
Suitable For Mono Block Pumps, Sump Submersible Pumps, Jet Pumps, Centrifugal Pumps,….Etc.
Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc
FEATURES
High reliability and Low maintenance.
this automatic best and most reliable Water Level Controller 8GSR can be used for a long time, no maintenance or repairing would be Required during its operational period.
Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement.
Overflow prevention system with the help of automatic motor on/off provides effective and reliable Water level monitoring, with Level Indicators.
Visual Indications : Four stage water level indicator for over head tank, three stage water level indicator for the sump, water flow indication, voltage level indication, power on indication,
How It Works : it has automatic motor on/off system which starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.
Dry Run
Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication.This time delay can adjust depend on motor situation and this is possible with the help of automatic motor on/off system …
Voltage Cut-off
Automatic Water Level Controller 8GSR automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.
Need
The Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank.
Toggle Bypass Switch.
The optional Toggle switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.
Power ON/OFF Switch.
Has rocker switch to select Power On/Off operation.
The Special Feature
In 8G series varients are avilable for any type of pump, bore well and any combination of tanks.
Application: The product is suitable for almost all site conditions water tank for maintaining level automatically because of its automatic motor on/off system. it can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater.
Sutable for
- mono block pump (sump motor)
- sump submersible pumps.
- Jet Pumps, etc…
This is the best and most reliable Water level controllers Indicator and is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc due to the presence of automatic motor on/off system.
At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.
8GDRD
Automatic, best and most reliable Water Level Controller For Single Phase Submersible Pumps Panel Driver (Single phase to three phase). This is a unique device for submersible Pump Up to 40 HP Capacity. Our submersible panel drive is the most suitable device for start/Run capacitors Panel Driven Water Pumps. It increases the life of motor to work for year. Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc.
Visual Indications :
Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication.
How It Works : its automatic motor on/off system starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.
Dry Run
Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication.This time delay can adjust depend on motor situation.. this is also done due to automatic motor on/off feature.
Voltage Cut-off
Automatic Water Level Controller 8GSR automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.
Need
although the automatic motor on/off feature is available but The Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank.
Toggle Bypass Switch.
The optional Toggle switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.
Power ON/OFF Switch.
Has rocker switch to select Power On/Off operation.
The Special Feature
In 8G series varients are avilable for any type of pump, bore well and any combination of tanks.
Special OPTION –
For single phase motor no need additional amps controller contactor its inbuilt double pole contact for starting and running capacitor.(this is much know motor supplier /service technicians).
Motor push out water timing delay can change by installation time or any time as per motor condition.
Dry pump auto reset is available if no maintainer in the building.
Application: This the best and most reliable water level controller which is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater.
Sutable for
- Bore well submersible pumps/dual starter operating motors.
- Jet Pumps,
This best and most reliable Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.
At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need with help of automatic motor on/off system…
8GDRD3A
This too is Automatic, best and most reliable Water Level Controller For Single Phase Submersible Pumps Panel Driver (Single phase to three phase). This is a unique device for submersible Pump Up to 40 HP Capacity. Our submersible panel drive is the most suitable device for start/Run capacitors Panel Driven Water Pumps. It increases the life of motor to work for year. Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc.
Visual Indications :
Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication.
How It Works : it has automatic motor on/off system which starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.
Dry Run
Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication.This time delay can adjust depend on motor situation and this too happen because of automatic water on/off system….
Voltage Cut-off
Automatic Water Level Controller 8GSR automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.
Need
The Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank.
Toggle Bypass Switch.
The optional Toggle switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.
Power ON/OFF Switch.
Has rocker switch to select Power On/Off operation.
The Special Feature
In 8G series varients are avilable for any type of pump, bore well and any combination of tanks.
Special OPTION –
For single phase motor no need additional amps controller contactor its inbuilt double pole contact for starting and running capacitor.(this is much know motor supplier /service technicians).
Motor push out water timing delay can change by installation time or any time as per motor condition.
Dry pump auto reset is available if no maintainer in the building.
Application: The product is best and most reliable water level controller which is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater.
Sutable for
- Bore well submersible pumps/dual starter operating motors.
- Jet Pumps,
This Water level controllers Indicator is highly recommended for metro cities due to its automatic motor on/off system or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.
At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.
8G3/4RAC
(Genarally used DUAL MOTORS, SUMP TO TANK, MCB/SWITCH/DP TYPE AND BOREWELL TO TANK/SUMP,PUSH BUTTON/DUAL TYPE STARTER).
This Automatic , best and most reliable Water Level Controller System is specially designed for Dual motor operation.
This model is a Dual control type Water level controller system which can control Sump motor as well as Bore well motor with automatic changeover technology such as automatic motor on/off system..
This system is suitable where both the motors are used to pump water to Common overhead tank (Single Tank).
There are two mode of operation. Sump mode and Bore well mode. When there is a Water in the sump the system works on sump Mode, when the Water in the sump tank gets Below foot Valve Level it Automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode.
This system is suitable for Residences, Commercial complexes, Residential Apartments, hotels, hospitals, Industries, hostels, …Etc..
This system is suitable where both sump motor & Bore well motor are used to pump water to a common overhead tank. The system every time checks for available of water in the Sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to Bore well motor.
The system can be upgraded into “Multi-tank control system” to maintain water level in several overhead tanks.
Visual Indications :
Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication
Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full that means it has water tank automatic switch installed in it..
This is a product mainly focused to help people with submersible pumps who previously had little control over the functionality of the pump and had to start manually and stop the pump with all those uneasy methods. which make the operation of these pump difficult for novice users, keeping in mind the ease of use we developed this system which makes the operation of these pumps a child’s play.
It is an unique device for single phase submersible pumps.
Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement.
How It Works : due to the presence of automatic motor on/off system it starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.
Dry Run
Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication.This time delay can adjust depend on motor situation.. this too happen with the automatic motor on/off system..
Need
The Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank.
Toggle Bypass Switch.
The optional toggle switch For borewell rocker switch is sump motor provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.
Power ON/OFF Switch.
Has rocker switch to select Power On/Off operation.
Application:
The product is the best and most reliable water level controller and suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination
8G4R/OBO
(Genarally used DUAL MOTORS ONE BY ONE OPERATION, SUMP/BORE TO TANK, PUSH BUTTON/DUAL TYPE STARTER).
The TIC water level controller 8G4ROBO is a Dual PUMP controller type systems which can control Sump motor as well as Bore well motor (or sump motor).
The 8G4R/OBO is the best and most reliable water level controller system which is suitable where both the motors are used to pump water to overhead tanks ONE BY ONE .